In a cooperation with Pindstrup Mosebrug DIS has been in charge of the development and construction of a wood fiber factory in Latvia, where a de-fibrator converts wood chips to wood fibers which are a supplement added to sphagnum.
In connection with the construction of a new wood fiber factory in Latvia, Pindstrup Mosebrug needed DIS competences. An old paper machine had to be refurbished and optimized, so that it could be used to make wood fibers. In addition, an efficient flow had to be established for the entire production.
In close cooperation with Pindstrup Mosebrug, DIS was responsible for the development of the production line with a workflow from the input of raw materials (woodchips), the separation of un-wanted metals in the woodchips, transport of the woodchips to the de-fibrator, processes around the purchased de-fibrator and transport of the finished product (wood fiber) to warehouses and platforms. The development of the factory was focused on Pindstrup Mosebrug’s own experiences and safety restrictions. Following, DIS provided advise on the refurbishment and optimization of the assembly of the de-fibrator.
- It was obvious that we needed to get touch with DIS, as they have the competences we needed in connection with the construction of our new wood fiber factory, where the starting point was an old and worn paper machine. Today we have a smooth-running production plant, but it was a major task where we ran into several challenges; none that could not be solved, but it has been really comforting to have a partner like DIS on the sidelines, says Simon Søe, director of Pindstrup Mosebrug in Latvia.
Today Pindstrup Mosebrug has an efficient and modern wood fiber factory, where the refurbished paper machine makes woodchips into wood fiber for use in the production of sphagnum via thermal de-fibration
ABOUT PINDSTRUP MOSEBRUG
Based in Denmark and with production facilities in Latvia, Spain, Ireland, Russia, Denmark and Great Britain Pindstrup Mosebrug A/S is one of the world’s leading manufacturers of substrates for professional gardeners and private consumers.
AGCOAGCO, one of the world's largest manufacturers of agricultural machinery, is on the market with the IDEAL Massey Ferguson Combine Harvester -...Landmaschinentechnik, Metallindustrie
AGCODIS has been a permanent collaborator with AGCO/Laverda for a long time. Over the years, DIS has been involved in a number...
SKY-LIGHTIn the production area of the film and packaging manufacturer SKY-LIGHT, there is now a flexible packaging system, for which DIS has...
VELUXIn connection with the global launch of a new generation of skylights, DIS was involved in the development, implementation and optimization of...
VELUXThe VELUX Group is represented globally, and it was an inquiry by VELUX in Germany, that kick started a partnership between the...Metallindustrie
VeluxIn cooperation with VELUX, DIS has investigated the possibility of further developing VELUX’ existing product development process by using simulation to a...
MekoprintDIS develops and does calculations on bus shelter
J.N. BechJ.N. Bech needed external advice and input on how to optimize the production flow. On that note, DIS has completed a pre-project...
Haldor Topsøe A/SIn cooperation with Haldor Topsøe A/S DIS’ task was to develop a simple production line for the physical handling of the product...Metallindustrie
Department of DefenseFES came to DIS for advice and expertise when they needed to mature their new mobile unit.Energie, Metallindustrie, Elektrogeräte
GrundfosWith LIFELINK, the people in the world’s poorest regions will only need to use a mobile phone to get safe drinking water....Energie, Metallindustrie
GrundfosWhen Grundfos faced the need for a new series of pumps, DIS got involved with the development team, which had to develop...
- Energie, Öl & Gas, Metallindustrie
NOVMore than 10 years ago, DIS developed a machine for NOV. The machine automatically shortened leftovers of steel so they can be...Energie, Öl & Gas, Metallindustrie
NOVWhen NOV wanted to develop a new control system used in the extrusion process, they contacted DISLandmaschinentechnik, Metallindustrie
NILFISK EGHOLMIn the spring of 2013 Nilfisk Egholm chose to collaborate with DIS to have new eyes on the design of the rear...Öl & Gas, Metallindustrie
VikingDIS has assisted VIKING in the innovation and development of life saving equipment.
- Öl & Gas, Metallindustrie
NovencoA close cooperation between DIS and Novenco has resulted in a significantly improved ventilation system.Energie, Metallindustrie, Wind
LM WIND POWERWhen LM Wind Power wanted to implement a GPS, DIS was entrusted with the project of reviewing and updating the company’s engineering...Energie, Metallindustrie, Wind
SIEMENS WIND POWERWhen Siemens Wind Power contacted DIS with a request for dimensioning of lifting equipment, it was crucial that the task was to...Energie, Metallindustrie, Wind
SIEMENS WIND POWERWith the assistance of DIS, Siemens Wind Power has developed special lifting equipment.
- Nahrungsmittelproduktion, Metallindustrie, Prozess- & Umweltindustrie
Alfa LavalIn close collaboration with Alfa Laval’s R&D team, DIS developed the design for the MEP.Öl & Gas, Nahrungsmittelproduktion, Metallindustrie, Prozess- & Umweltindustrie
Alfa LavalWhen Alfa Laval’s ORCA series needed a technical update, DIS was involved to give the series a more modern and contemporary design.Öl & Gas, Nahrungsmittelproduktion, Metallindustrie, Prozess- & Umweltindustrie
Alfa LavalWhen Alfa Laval were to introduce the AQUA freshwater generator, DIS was called in to help Alfa Laval develop the promotional material...
- Zement & Kalk
FLSmidthParametric modeling facilitates the development of a new vertical mill.Metallindustrie, Elektrogeräte
CENTER FOR PARKERINGDIS has developed the idea and construction concept for the ticket-and-coin refund tray, as well as the solar cells on top of...Nahrungsmittelproduktion, Metallindustrie
Amcor - Vision SystemWhen Amcor needed to assure quality in the pressure control valve for the packaging of a coffee container, DIS’ VISION competencies were...Metallindustrie
PRESSALITDIS developed a wall-mounted folding seat from idea to concept and also developed the first prototype and performed the initial tests for...
N. GraversenThe metal factory N. Graversen came to the conclusion that they needed help to develop a new mechanical trolley to transport gypsum...Metallindustrie
HMFTo improve efficiency during their SW life cycle, Højbjerg Maskinfabrik (HMF) contacted DIS to get help in improving their SW process. DIS...Landmaschinentechnik, Metallindustrie
Kongskilde A/SKongskilde A/S is globally known for its red agricultural machinery. Kongskilde works closely with DIS on the Danish, German and Polish markets...