When Amcor needed to assure quality in the pressure control valve for the packaging of a coffee container, DIS’ VISION competencies were put to the test.
Amcor had the following specification requirements for the solution:
- The system should not delay the laminate production. The laminate moves at 80m/min. and it was expected that the system could move up to 150 m/min., equivalent to about 25 valves per second for one track. (There are 6-10 lanes).
- The system should be implemented in the current laminating machine and should not complicate the servicing of the machine.
- The system should be easy to operate.
- The system should store data for quality assurance in a database along with information about the laminate.
DIS’ solution was a VISION-system, which was developed, designed and implemented from scratch. Two cameras are now feeding a central PC with the necessary images and data that set off an alarm in case of fluctuations in the production. In addition, the operator has the ability to make manual checks and accurate measurements directly on a monitor.
The solution therefore minimises the waste of the expensive laminate as it immediately alerts the operator in case of any inaccuracy. Finally, the solution ensures that the values built in to the laminate meet the specifications and documentation of quality is saved for both internal and external use.
Amcor is a global leader in responsible global packaging solutions supplying a broad range of plastics (rigid & flexible), fibers, metal and glass packaging products designed to enhance the products consumers use in everyday life.
AGCOAGCO, one of the world's largest manufacturers of agricultural machinery, is on the market with the IDEAL Massey Ferguson Combine Harvester -...Landmaschinentechnik, Metallindustrie
AGCODIS has been a permanent collaborator with AGCO/Laverda for a long time. Over the years, DIS has been involved in a number...
SKY-LIGHTIn the production area of the film and packaging manufacturer SKY-LIGHT, there is now a flexible packaging system, for which DIS has...
VELUXIn connection with the global launch of a new generation of skylights, DIS was involved in the development, implementation and optimization of...
VELUXThe VELUX Group is represented globally, and it was an inquiry by VELUX in Germany, that kick started a partnership between the...Metallindustrie
VeluxIn cooperation with VELUX, DIS has investigated the possibility of further developing VELUX’ existing product development process by using simulation to a...
MekoprintDIS develops and does calculations on bus shelter
Pindstrup MosebrugIn a cooperation with Pindstrup Mosebrug DIS has been in charge of the development and construction of a wood fiber factory in...
Haldor Topsøe A/SIn cooperation with Haldor Topsøe A/S DIS’ task was to develop a simple production line for the physical handling of the product...Metallindustrie
Department of DefenseFES came to DIS for advice and expertise when they needed to mature their new mobile unit.Energie, Metallindustrie, Elektrogeräte
GrundfosWith LIFELINK, the people in the world’s poorest regions will only need to use a mobile phone to get safe drinking water....Energie, Metallindustrie
GrundfosWhen Grundfos faced the need for a new series of pumps, DIS got involved with the development team, which had to develop...
- Energie, Öl & Gas, Metallindustrie
NOVMore than 10 years ago, DIS developed a machine for NOV. The machine automatically shortened leftovers of steel so they can be...Energie, Öl & Gas, Metallindustrie
NOVWhen NOV wanted to develop a new control system used in the extrusion process, they contacted DISLandmaschinentechnik, Metallindustrie
NILFISK EGHOLMIn the spring of 2013 Nilfisk Egholm chose to collaborate with DIS to have new eyes on the design of the rear...Öl & Gas, Metallindustrie
VikingDIS has assisted VIKING in the innovation and development of life saving equipment.
- Öl & Gas, Metallindustrie
NovencoA close cooperation between DIS and Novenco has resulted in a significantly improved ventilation system.Nahrungsmittelproduktion, Metallindustrie, Elektrogeräte
PBI - DansensorWhen PBI-Dansensor had to develop a new gas mixer, DIS was involved to perform the mechanical engineering and industrial design.Energie, Metallindustrie, Wind
LM WIND POWERWhen LM Wind Power wanted to implement a GPS, DIS was entrusted with the project of reviewing and updating the company’s engineering...Energie, Metallindustrie, Wind
SIEMENS WIND POWERWhen Siemens Wind Power contacted DIS with a request for dimensioning of lifting equipment, it was crucial that the task was to...
- Energie, Metallindustrie, Wind
SIEMENS WIND POWERWith the assistance of DIS, Siemens Wind Power has developed special lifting equipment.Nahrungsmittelproduktion, Metallindustrie, Prozess- & Umweltindustrie
Alfa LavalIn close collaboration with Alfa Laval’s R&D team, DIS developed the design for the MEP.Öl & Gas, Nahrungsmittelproduktion, Metallindustrie, Prozess- & Umweltindustrie
Alfa LavalWhen Alfa Laval’s ORCA series needed a technical update, DIS was involved to give the series a more modern and contemporary design.
- Öl & Gas, Nahrungsmittelproduktion, Metallindustrie, Prozess- & Umweltindustrie
Alfa LavalWhen Alfa Laval were to introduce the AQUA freshwater generator, DIS was called in to help Alfa Laval develop the promotional material...Zement & Kalk
FLSmidthParametric modeling facilitates the development of a new vertical mill.Metallindustrie, Elektrogeräte
CENTER FOR PARKERINGDIS has developed the idea and construction concept for the ticket-and-coin refund tray, as well as the solar cells on top of...Metallindustrie
J.N. BechJ.N. Bech needed external advice and input on how to optimize the production flow. On that note, DIS has completed a pre-project...
PRESSALITDIS developed a wall-mounted folding seat from idea to concept and also developed the first prototype and performed the initial tests for...Metallindustrie
N. GraversenThe metal factory N. Graversen came to the conclusion that they needed help to develop a new mechanical trolley to transport gypsum...Metallindustrie
HMFTo improve efficiency during their SW life cycle, Højbjerg Maskinfabrik (HMF) contacted DIS to get help in improving their SW process. DIS...Landmaschinentechnik, Metallindustrie
Kongskilde A/SKongskilde A/S is globally known for its red agricultural machinery. Kongskilde works closely with DIS on the Danish, German and Polish markets...